10:30
Forming simulations with NURBS shells in LS-DYNA
Stefan Hartmann (DYNAmore GmbH), Attila P. Nagy (Livermore Software Technology Corporation (LSTC)), Dave J. Benson (Livermore Software Technology Corporation (LSTC))

10:50
A mixed isogeometric collocation method for rate-independent elastoplasticity
Frederik Fahrendorf (Technical University of Braunschweig), Laura De Lorenzis (Technical University of Braunschweig)

11:10
A scaled boundary NURBS approach for nonlinear solid analysis
Markus Klassen (RWTH Aachen University), Margarita Chasapi (RWTH Aachen University), Bernd Simeon (University of Kaiserslautern), Sven Klinkel (RWTH Aachen University)

11:30
Simulation of brittle fracture in shells using a phase-field approach and LR B-splines
Davide Proserpio (Norwegian University of Science and Technology), Josef Kiendl (Norwegian University of Science and Technology), Marreddy Ambati (Technical University of Braunschweig), Laura De Lorenzis (Technical University of Braunschweig), Kjetil André Johannessen (Norwegian University of Science and Technology), Trond Kvamsdal (Norwegian University of Science and Technology)

11:50
A shell element for the analysis of interlaminar stresses and delaminations of layered composites
Gregor Knust (Technical University of Darmstadt), Friedrich Gruttmann (Technical University of Darmstadt)

10:30
Modeling porous medium modification through induced calcite precipitation (Keynote)
Johannes Hommel (University of Stuttgart), Adrienne J. Phillips (Montana State University), Robin Gerlach (Montana State University), Alfred B. Cunningham (Montana State University), Rainer Helmig (University of Stuttgart), Holger Class (University of Stuttgart)

11:10
Heat transfer in multi-phase porous media for intelligent cancer detection
Angela Niedermeyer (RWTH Aachen University), Carlos Alberto Hernandez Padilla (RWTH Aachen University), Marcus Stoffel (RWTH Aachen University), Bernd Markert (RWTH Aachen University)

11:30
Variation of different growth descriptions in a metastatic proliferation model
Patrick Schröder (University of Stuttgart), Arndt Wagner (University of Stuttgart), Daniela Stöhr (University of Stuttgart), Markus Rehm (University of Stuttgart), Wolfgang Ehlers (University of Stuttgart)

11:50
The TPM$^2$-Method: A two-scale homogenization scheme for fluid saturated porous media
Florian Bartel (TU Dortmund University), Tim Ricken (TU Dortmund University), Jörg Schröder (University of Duisburg-Essen), Joachim Bluhm (University of Duisburg-Essen)

12:10
Using a pore-network model to couple mass, momentum and energy at the interface between free flow and porous media flow
Kilian Weishaupt (University of Stuttgart), Rainer Helmig (University of Stuttgart)

10:30
General imperfect interface models at finite deformations
Tim Heitbreder (TU Dortmund University), Jörn Mosler (TU Dortmund University)

10:50
Computational modelling of wear and the effective frictional behaviour of elastoplastic tools
Rolf Berthelsen (TU Dortmund University), Hendrik Wilbuer (TU Dortmund University), Andreas Menzel (TU Dortmund University)

11:10
A homogenisation method based on the Irving-Kirkwood-Theory
Maximilian Müller (Technical University of Darmstadt), Friedrich Gruttmann (Technical University of Darmstadt)

10:30
A Bayesian approach to parameter identification for phase-field modeling fracture (Keynote)
Tao Wu (Technical University of Braunschweig), Bojana Rosić (Technical University of Braunschweig), Hermann Matthies (Technical University of Braunschweig), Laura De Lorenzis (Technical University of Braunschweig)

11:10
Transport properties of microcracked porous materials: Micromechanics models and mesoscale simulations
Jithender Jaswant Timothy (Ruhr University Bochum), Tagir Iskhakov (Ruhr University Bochum), Günther Meschke (Ruhr University Bochum)

11:30
Multiscale model of ASR-induced damage in concrete
Tagir Iskhakov (Ruhr University Bochum), Jithender Jaswant Timothy (Ruhr University Bochum), Günther Meschke (Ruhr University Bochum)

11:50
A Lattice Boltzmann approach for advection-diffusion problems in porous media including dissolution
Hussein Alihussein (Technical University of Braunschweig), Manfred Krafczyk (Technical University of Braunschweig), Konstantin Kutscher (Technical University of Braunschweig), Martin Geier (Technical University of Braunschweig)

10:30
An HPC technology review with respect to large scale engineering applications
Ralf Schneider (High Performance Computing Center Stuttgart)

10:50
Numerical Simulation of Flow with Volume Condensation during Accident in Containment of Nuclear Power Plant
Jing Zhang (High Performance Computing Center Stuttgart)

11:10
Modelling the neuromuscular system using HPC systems
Thomas Klotz (University of Stuttgart), Nehzat Emamy (University of Stuttgart), Thomas Ertl (University of Stuttgart), Dominik Göddeke (University of Stuttgart), Aaron Krämer (University of Stuttgart), Michael Krone (University of Stuttgart), Benjamin Maier (University of Stuttgart), Miriam Mehl (University of Stuttgart), Tobias Rau (University of Stuttgart), Oliver Röhrle (University of Stuttgart)

11:30
Load-balance strategies for CFD-codes on HPC systems
Philipp Offenhäuser (High Performance Computing Center Stuttgart)

11:50
Eigenmodes for nonlinear operators
Uwe Küster (High Performance Computing Center Stuttgart), Ralf Schneider (High Performance Computing Center Stuttgart), Andreas Ruopp (High Performance Computing Center Stuttgart)

10:30
Constitutive modeling of shape memory alloys incorporating transformation-induced plasticity and damage (Keynote)
George Chatzigeorgiou (Arts et Métiers ParisTech, Metz), Long Cheng (Arts et Métiers ParisTech, Metz), Yves Chemisky (Arts et Métiers ParisTech, Metz), Fodil Meraghni (Arts et Métiers ParisTech, Metz)

11:10
Bilayer Liquid Crystal and Freedericksz Instability
Krishnendu Haldar (Ecole Polytechnique), Kostas Danas (Ecole Polytechnique), Nicolas Triantafyllidis (Ecole Polytechnique)

11:30
Thermo-magneto-mechanical modeling of magneto-rheological elastomers
Markus Mehnert (Friedrich-Alexander University of Erlangen-Nürnberg)

11:50
Continuum Mechanical Modeling of Strain-Induced Crystallization in Polymers
Serhat Aygün (TU Dortmund University), Sandra Klinge (TU Dortmund University), Sanjay Govindjee (University of California)

10:30
Stochastic modelling of microstructures for virtual material design (Keynote)
Claudia Redenbach (University of Kaiserslautern)

11:10
Fiber-Orientation-Evolution Models for Compression Molding of Fiber Reinforced Polymers
Róbert Bertóti (Karlsruhe Institute of Technology (KIT)), Thomas Böhlke (Karlsruhe Institute of Technology (KIT))

11:30
Effective meso properties for fibre reinforced polymer curing
Christian Dammann (Paderborn University), Rolf Mahnken (Paderborn University), Peter Lenz (Paderborn University)

11:50
A micro-mechanically motivated approach for modelling the oxidative ageing process of elastomers
Darcy Beurle (Leibniz Universität Hannover), Markus André (University of Applied Sciences and Arts Hannover), Udo Nackenhorst (Leibniz Universität Hannover)

12:10
Rheology of Additive Manufacturing Processes for Medical Silicone
Philipp Hartmann (Leibniz Universität Hannover), Christian Weißenfels (Leibniz Universität Hannover), Peter Wriggers (Leibniz Universität Hannover)